fuse chart BMW MOTORRAD G 650 XCHALLENGE 2007 Rider's Manual (in English)

BMW Motorrad auxiliary
stand ......................... 81
BMW Motorrad front-wheel
stand ......................... 82
Fuses........................ 84
Bulbs ......................... 86
Air filter . . . . . .................. 92
Jump starting . . .............. 95
Battery . . . . . .................. 96
Number-plate carrier . . ..... 100
9 Care . . . . . ................ 103
Care products . . ............ 104
Washing motorcycle . . . ..... 104
Cleaning easily damaged
components ................ 104
Paint care . . ................ 105
Protective wax coating ..... 106
Laying up motorcycle . ..... 106
Restoring motorcycle to
use......................... 106
10 Technical data . . . . . . . 107
Troubleshooting chart . ..... 108
Threaded fasteners . . . ..... 109
Engine . . . . . ................ 110
Fuel . ....................... 111Engine oil . . ................ 111
Clutch...................... 112
Transmission............... 112
Rear-wheel drive........... 113
Running gear............... 113
Brakes . . . . . ................ 114
Wheels and tyres........... 115
Electrics . . . . ................ 117
Frame...................... 118
Dimensions ................ 119
Weights . . . . ................ 119
Riding specifications . . ..... 120
11 Service . . . . . . . . . . . . . . . . 121
BMW Motorrad service ..... 122
BMW Motorrad service
quality...................... 122
BMW Motorrad Service
Card: on-the-spot break-
down assistance........... 122
BMW Motorrad service net-
work . ....................... 123
Maintenance work . . . . . ..... 123
Confirmation of mainten-
ance work . . ................ 124
Confirmation of service ..... 129

with OE BMW Motorrad ABS:
Switch on the ignition.
Pre-ride check is performed.
( 47)
ABS self-diagnosis is
performed. ( 48)
Wait until the warning light for
the coolant temperature stops
flashing.
The idle actuator is posi-
tioned after you switch on
the ignition. The coolant-tem-
perature warning light flashes
if the idle actuator has not cor-
rectly positioned before the pre-
ride check completes. In order
to avoid subsequent problems,
wait for this process to complete
before proceeding.Press starter button1.
If ambient temperatures are
very low, you might find it
necessary to open the throttle
slightly when starting the engine.
At ambient temperatures below
0 °C, disengage the clutch after
switching on the ignition.
If the engine fails to start
even though the starter
turns, insufficient battery voltage
might be causing the problem.
Recharge the battery before you
start the engine, or use jump
leads and a donor battery to
start.The engine starts.
Consult the troubleshooting
chart below if the engine re-
fuses to start. ( 108)
Pre-ride checkThe instrument cluster runs a
test of the instruments and the
warning lights and telltale lights
and the display when the igni-
tion is switched on. This test is
known as the "Pre-Ride-Check".
Phase 1
All the telltale and warning lights
are switched on briefly, along
with all the segments of the mul-
tifunction display.
Phase 2
The tyre parameters stored in
the memory of the instrument
cluster appear briefly on the dis-
play.
The instrument cluster then
reverts to its normal operating
mode.
547zRiding