INFINITI QX56 2011 Factory Service Manual

DAS-106
< ECU DIAGNOSIS INFORMATION >[DCA]
ICC SENSOR
×
: Applicable
DTC
CONSULT-III display
ICC system warning lamp
Fail-safe function Reference
CONSULT-III
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Distance Control Assist (DCA)
Forward Collision Warning (FCW) Intelligent Brake Assist (IBA)
Brake Assist (with preview function)
C1A00 CONTROL UNIT ON ××××××CCS-83
C1A01 POWER SUPPLY CIR ON ××××××CCS-85
C1A02 POWER SUPPLY CIR2 ON ××××××CCS-85
C1A12 LASER BEAM OFFCNTR ON ×××××CCS-96
C1A16 RADAR STAIN ON ×××××CCS-106
C1A18 LASER AIMING INCMP ON ×××××CCS-109
C1A21 UNIT HIGH TEMP ON ××××××CCS-111
C1A39 STRG SEN CIR ON ××××××CCS-124
C1A50 ADAS MALFUNCTION ON ××××××CCS-128
U0104 ADAS CAN CIR1 ON ××××××CCS-132
U0121 VDC CAN CIR2 ON ××××××CCS-133
U0126 STRG SEN CAN CIR1 ON ××××××CCS-135
U0405 ADAS CAN CIR2 ON ××××××CCS-140
U0415 VDC CAN CIR1 ON ××××××CCS-141
U0428 STRG SEN CAN CIR2 ON ××××××CCS-143
U1000 CAN COMM CIRCUIT ON ××××××CCS-145
U1010 CONTROL UNIT (CAN) ON ××××××CCS-147
Revision: 2010 May2011 QX56

DAS
ACCELERATOR PEDAL ACTUATORDAS-107
< ECU DIAGNOSIS INFORMATION > [DCA]
C
D
E
F
G H
I
J
K L
M B
N P A
ACCELERATOR PEDAL ACTUATOR
Reference ValueINFOID:0000000006223518
VALUES ON THE DIAGNOSIS TOOL
TERMINAL LAYOUT
PHYSICAL VALUES
Monitor item Condition Value/Status
TGT FBK FRC Drive the vehicle and
operate the DCA sys-
temWhen the ADAS control unit is control-
ling the accelerator pedal actuator
It changes with the demand from
the ADAS control unit
TGT MOT POSI NOTE:
The item is indicated, but not used. —
ACT MOT POSI Engine running Depress accelerator pedal It changes according to the de-
pressed amount of accelerator
pedal
AP OPEN Engine running Depress accelerator pedal It changes according to the de-
pressed amount of accelerator pedal
APA TEMP Engine running Display the accelerator pedal ac-
tuator integrated motor tempera- ture
APA CURRENT Drive the vehicle and
operate the DCA sys-
temWhen the ADAS control unit is control-
ling the accelerator pedal actuator Display the accelerator pedal ac-
tuator motor operation consump-
tion current
APA PWR Ignition switch ON Battery voltage
APA OPE STATS Engine running When the accelerator pedal actuator
control is permitted
On
When the accelerator pedal actuator
control is invalid Off
APA STATS Engine running When the accelerator pedal actuator is
normal
Ready
When the accelerator pedal actuator is
temporarily malfunctioning TP NG
When the accelerator pedal actuator is
malfunctioning NG
During the accelerator pedal actuator
operation preparations Init
JSOIA0231ZZ
Revision: 2010 May2011 QX56

DAS-108
< ECU DIAGNOSIS INFORMATION >[DCA]
ACCELERATOR PEDAL ACTUATOR
DTC Inspection Priority Chart
INFOID:0000000006223519
If multiple DTCs are detected simultaneously, chec k them one by one depending on the following DTC inspec-
tion priority chart.
DTC IndexINFOID:0000000006223520
NOTE:
 The details of time display are as per the following.
- CRNT: A malfunction is detected now
- PAST: A malfunction was detected in the past
 IGN counter is displayed in FFD (Freeze Frame Data).
- 0: The malfunctions that are detected now
- 1 - 39: It increases like 0 → 1 → 2 ··· 38 → 39 after returning to the normal condition whenever the ignition
switch OFF → ON. It returns to 0 when a malfunction is detected again in the process.
- If it is over 39, it is fixed to 39 until the self-diagnosis results are erased.
× : Applicable
Te r m i n a l N o .
(Wire color) Description
ConditionVa l u e
(Approx.)
+ – Signal name Input/
Output
1
(B/O)
Ground Battery power supply Input Ignition switch OFF Battery voltage
2
(B) Ground — Ignition switch ON 0 V
3
(W/G) Ignition power supply Input Ignition switch ON Battery voltage
4
(Y) ITS communication-L — — —
5
(L) ITS communication-H — — —
Priority Detected items (DTC)
1  U1000: CAN COMM CIRCUIT
 U1010: CONTROL UNIT (CAN)
2  C1F02: APA C/U MALF
3  C1F01: APA MOTOR MALF
 C1F03: APA HI TEMP
 C1F05: APA PWR SUPLY CIR
 C1F06: CAN CIR2
 C1F07: CAN CIR1
CONSULT-III display ICC system warnin
g lamp Fail-safe function Reference
C1F01: APA MOTOR MALF ON ×DAS-166
C1F02: APA C/U MALF ON ×DAS-168
C1F03: APA HI TEMP — — DAS-170
C1F05: APA PWR SUPLY CIR ON×DAS-171
C1F06: CAN CIR2 ON ×DAS-173
C1F07: CAN CIR1 ON ×DAS-174
U1000: CAN COMM CIRCUIT ON ×DAS-182
U1010: CONTROL UNIT (CAN) ON ×DAS-184
Revision: 2010 May2011 QX56

DAS
DRIVER ASSISTANCE SYSTEMSDAS-109
< WIRING DIAGRAM > [DCA]
C
D
E
F
G H
I
J
K L
M B
N P A
WIRING DIAGRAM
DRIVER ASSISTANCE SYSTEMS
Wiring DiagramINFOID:0000000006223521
JCOWM0352GB
Revision: 2010 May2011 QX56

DAS-110
< WIRING DIAGRAM >[DCA]
DRIVER ASSISTANCE SYSTEMS
JCOWM0353GB
Revision: 2010 May2011 QX56

DAS
DRIVER ASSISTANCE SYSTEMSDAS-111
< WIRING DIAGRAM > [DCA]
C
D
E
F
G H
I
J
K L
M B
N P A
JCOWM0354GB
Revision: 2010 May2011 QX56

DAS-112
< WIRING DIAGRAM >[DCA]
DRIVER ASSISTANCE SYSTEMS
JCOWM0355GB
Revision: 2010 May2011 QX56

DAS
DRIVER ASSISTANCE SYSTEMSDAS-113
< WIRING DIAGRAM > [DCA]
C
D
E
F
G H
I
J
K L
M B
N P A
JCOWM0356GB
Revision: 2010 May2011 QX56

DAS-114
< WIRING DIAGRAM >[DCA]
DRIVER ASSISTANCE SYSTEMS
JCOWM0357GB
Revision: 2010 May2011 QX56

DAS
DRIVER ASSISTANCE SYSTEMSDAS-115
< WIRING DIAGRAM > [DCA]
C
D
E
F
G H
I
J
K L
M B
N P A
JCOWM0358GB
Revision: 2010 May2011 QX56