sensor INFINITI QX56 2011 Factory Workshop Manual
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2011, Model line: QX56, Model: INFINITI QX56 2011Pages: 5598, PDF Size: 94.53 MB
Page 150 of 5598
AV-2
Description .............................................................108
Work Procedure .....................................................108
CONFIGURATION (AV CONTROL UNIT) ......109
Description ........................................................... ..109
Work Procedure .....................................................109
Configuration List ...................................................109
PREDICTIVE COURSE LINE CENTER POSI-
TION ADJUSTMENT .......................................
111
Description ........................................................... ..111
Work Procedure .....................................................111
CALIBRATING CAMERA IMAGE (AROUND
VIEW MONITOR) .............................................
112
Description ........................................................... ..112
Work Procedure .....................................................112
DTC/CIRCUIT DIAGNOSIS ...................... ..118
U1000 CAN COMM CIRCUIT ......................... .118
Description ........................................................... ..118
DTC Logic ..............................................................118
Diagnosis Procedure ............................................118
U1010 CONTROL UNIT (CAN) .......................119
DTC Logic ............................................................ ..119
U1200 AV CONTROL UNIT .............................120
DTC Logic ............................................................ ..120
U1201 AV CONTROL UNIT .............................121
DTC Logic ............................................................ ..121
U1202 AV CONTROL UNIT .............................122
DTC Logic ............................................................ ..122
U1204 AV CONTROL UNIT .............................123
Description ........................................................... ..123
DTC Logic ..............................................................123
Diagnosis Procedure .............................................123
U1205 AV CONTROL UNIT .............................124
Description ........................................................... ..124
DTC Logic ..............................................................124
Diagnosis Procedure .............................................124
U1206 AV CONTROL UNIT .............................125
Description ........................................................... ..125
DTC Logic ..............................................................125
Diagnosis Procedure .............................................125
U1207 AV CONTROL UNIT .............................126
Description ........................................................... ..126
DTC Logic ..............................................................126
Diagnosis Procedure .............................................126
U1216 AV CONTROL UNIT .............................127
DTC Logic ............................................................ ..127
U1217 AV CONTROL UNIT .............................128
DTC Logic ............................................................ ..128
U1218 AV CONTROL UNIT .............................129
DTC Logic ............................................................ .129
Diagnosis Procedure .............................................129
U1219 AV CONTROL UNIT .............................130
DTC Logic ............................................................ .130
Diagnosis Procedure .............................................130
U121A AV CONTROL UNIT .............................131
DTC Logic ............................................................ .131
Diagnosis Procedure .............................................131
U121B AV CONTROL UNIT .............................132
DTC Logic ............................................................ .132
Diagnosis Procedure .............................................132
U121C AV CONTROL UNIT .............................133
DTC Logic ............................................................ .133
Diagnosis Procedure .............................................133
U121D AV CONTROL UNIT .............................134
DTC Logic ............................................................ .134
Diagnosis Procedure .............................................134
U121E AV CONTROL UNIT .............................135
DTC Logic ............................................................ .135
Diagnosis Procedure .............................................135
U1225 AV CONTROL UNIT .............................136
DTC Logic ............................................................ .136
U1227 AV CONTROL UNIT .............................137
DTC Logic ............................................................ .137
Diagnosis Procedure .............................................137
U1228 AV CONTROL UNIT .............................138
DTC Logic ............................................................ .138
U1229 AV CONTROL UNIT .............................139
DTC Logic ............................................................ .139
U122A AV CONTROL UNIT .............................140
DTC Logic ............................................................ .140
Diagnosis Procedure .............................................140
U122E AV CONTROL UNIT .............................141
DTC Logic ............................................................ .141
U1232 STEERING ANGLE SENSOR ..............142
DTC Logic ............................................................ .142
Diagnosis Procedure .............................................142
U1243 FRONT DISPLAY UNIT ........................143
DTC Logic ............................................................ .143
Diagnosis Procedure .............................................143
U1244 GPS ANTENNA ....................................145
DTC Logic ............................................................ .145
Diagnosis Procedure .............................................145
U1258 SATELLITE RADIO ANTENNA ............146
DTC Logic ............................................................ .146
Diagnosis Procedure .............................................146
Revision: 2010 May2011 QX56
Page 151 of 5598
AV
AV-3
C
DE
F
G H
I
J
K L
M B
A
O P
U125A HEADREST DISPLAY UNIT .............. ..147
DTC Logic ........................................................... ..147
Diagnosis Procedure .............................................147
U1263 USB .......................................................148
DTC Logic ........................................................... ..148
Diagnosis Procedure .............................................148
U1264 ANTENNA AMP. ...................................149
DTC Logic ........................................................... ..149
Diagnosis Procedure .............................................149
U1265 BOSE AMP. ..........................................150
DTC Logic ........................................................... ..150
Diagnosis Procedure .............................................150
U1300 AV COMM CIRCUIT .............................151
Description .......................................................... ..151
U1310 AV CONTROL UNIT .............................152
DTC Logic ........................................................... ..152
B2700 CORNER SENSOR [FL] .......................153
DTC Logic ........................................................... ..153
B2701 SENSOR HARNESS OPEN [CR-FL] ...154
DTC Logic ........................................................... ..154
Diagnosis Procedure .............................................154
B2702 CORNER SENSOR [FR] ......................155
DTC Logic ........................................................... ..155
B2703 SENSOR HARNESS OPEN [CR-FR] ...156
DTC Logic ........................................................... ..156
Diagnosis Procedure .............................................156
B2704 CORNER SENSOR [RL] ......................157
DTC Logic ........................................................... ..157
B2705 SENSOR HARNESS OPEN [CR-RL] ...158
DTC Logic ........................................................... ..158
Diagnosis Procedure .............................................158
B2706 CORNER SENSOR [RR] ......................159
DTC Logic ........................................................... ..159
B2707 SENSOR HARNESS OPEN [CR-RR] ..160
DTC Logic .............................................................160
Diagnosis Procedure .............................................160
POWER SUPPLY AND GROUND CIRCUIT ....161
AV CONTROL UNIT .............................................. ..161
AV CONTROL UNIT : Diagnosis Procedure .........161
FRONT DISPLAY UNIT ......................................... ..161
FRONT DISPLAY UNIT : Diagnosis Procedure ....161
HEADREST DISPLAY UNIT ................................. ..162
HEADREST DISPLAY UNIT : Diagnosis Proce-
dure ..................................................................... ..
162
VIDEO DISTRIBUTOR .......................................... ..163
VIDEO DISTRIBUTOR : Diagnosis Procedure ......163
BOSE AMP. ........................................................... ..163
BOSE AMP. : Diagnosis Procedure ......................163
AROUND VIEW MONITOR CONTROL UNIT .........164
AROUND VIEW MONITOR CONTROL UNIT : Di-
agnosis Procedure ............................................... ..
164
SONAR CONTROL UNIT (WITH AROUND VIEW
MONITOR) ............................................................. ..
165
SONAR CONTROL UNIT (WITH AROUND VIEW
MONITOR) : Diagnosis Procedure ........................
165
RGB DIGITAL IMAGE SIGNAL CIRCUIT ......166
Description .............................................................166
Diagnosis Procedure .............................................166
COMPOSITE IMAGE SIGNAL CIRCUIT (AV
CONTROL UNIT TO FRONT DISPLAY UNIT) .
167
Description ........................................................... ..167
Diagnosis Procedure .............................................167
COMPOSITE IMAGE SIGNAL CIRCUIT (AV
CONTROL UNIT TO VIDEO DISTRIBUTOR) .
168
Description .............................................................168
Diagnosis Procedure .............................................168
COMPOSITE IMAGE SIGNAL CIRCUIT (VID-
EO DISTRIBUTOR TO HEADREST DISPLAY
UNIT) ...............................................................
169
Description .............................................................169
Diagnosis Procedure .............................................169
AUX IMAGE SIGNAL CIRCUIT (FRONT AUX-
ILIARY INPUT JACKS TO AV CONTROL
UNIT) ...............................................................
171
Description .............................................................171
Diagnosis Procedure .............................................171
AUX IMAGE SIGNAL CIRCUIT (REAR AUX-
ILIARY INPUT JACKS TO VIDEO DISTRIBU-
TOR) ................................................................
172
Description .............................................................172
Diagnosis Procedure .............................................172
IMAGE SWITCH SIGNAL CIRCUIT ................173
Description .............................................................173
Diagnosis Procedure .............................................173
LOCATION RECOGNITION SIGNAL CIR-
CUIT ................................................................
175
Description .............................................................175
Diagnosis Procedure .............................................175
DISK EJECT SIGNAL CIRCUIT .....................176
Description .............................................................176
Diagnosis Procedure .............................................176
MODE CHANGE SIGNAL CIRCUIT ...............177
Description .............................................................177
Revision: 2010 May2011 QX56
Page 153 of 5598
AV
AV-5
C
DE
F
G H
I
J
K L
M B
A
O P
USB CONNECTOR ........................................ ..230
Removal and Installation ..................................... ..230
MICROPHONE .................................................231
Removal and Installation ..................................... ..231
GPS ANTENNA ................................................232
Removal and Installation ..................................... ..232
AROUND VIEW MONITOR CONTROL UNIT ..233
Removal and Installation .......................................233
FRONT CAMERA .............................................234
Removal and Installation ..................................... ..234
REAR CAMERA ...............................................235
Removal and Installation ..................................... ..235
SIDE CAMERA ................................................236
Removal and Installation ..................................... ..236
STEERING ANGLE SENSOR .........................237
Exploded View .......................................................237
Removal and Installation .......................................237
SONAR CONTROL UNIT ................................238
Removal and Installation .......................................238
SONAR SENSOR ............................................239
Removal and Installation .......................................239
ANTENNA FEEDER ........................................240
Feeder Layout .......................................................240
Revision: 2010 May2011 QX56
Page 154 of 5598
AV-6
< PRECAUTION >
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000006225819
The Supplemental Restraint System such as “A IR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severi ty of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and w hether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SRS AIR BAG” and “SEAT BELT” of this
Service Manual.
WARNING:
• To avoid rendering the SRS inopera tive, which could increase the risk of personal injury or death in
the event of a collision that would result in air bag inflation, all maintenance must be performed by
an authorized NISS AN/INFINITI dealer.
Improper maintenance, including in correct removal and installation of the SRS, can lead to personal
injury caused by unintent ional activation of the system. For re moval of Spiral Cable and Air Bag
Module, see the “SRS AIR BAG”.
Do not use electrical test equipmen t on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identi fied by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s)
with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly
causing serious injury.
When using air or electric power tools or hammers , always switch the ignition OFF, disconnect the
battery, and wait at least 3 minu tes before performing any service.
Precaution for Trouble DiagnosisINFOID:0000000006216211
AV COMMUNICATION SYSTEM
Do not apply voltage of 7.0 V or higher to the measurement terminals.
Use the tester with its open terminal voltage being 7.0 V or less.
Be sure to turn ignition switch OFF and disconnect the battery cable from the negative terminal before
checking the circuit.
Precaution for Harness RepairINFOID:0000000006216212
AV COMMUNICATION SYSTEM
Solder the repaired parts, and wrap with tape. [Frays of twisted line must be within 110 mm (4.33 in).]
PKIA0306E
Revision: 2010 May2011 QX56
Page 158 of 5598
AV-10
< SYSTEM DESCRIPTION >
COMPONENT PARTS
Component Description
INFOID:0000000006216214
1. Squawker RH 2. Center speaker 3. Corner sensor front RH
4. Squawker LH 5. Front camera 6. Corner sensor front LH
7. Side camera LH 8. Front door speaker LH 9. Headrest display unit LH
10. Rear door tweeter LH 11. Rear door speaker LH 12. Roof speaker LH
13. Woofer 14. Corner sensor rear LH 15. Satellite radio antenna
16. Rear camera 17. Corner sensor rear RH 18. BOSE amp.
19. Roof speaker RH 20. Antenna amp. 21. Rear door speaker RH
22. Rear door tweeter RH 23. Headrest display unit RH 24. Front door speaker RH
25. Side camera RH and infrared LED
(auxiliary lighting) 26. Front display unit 27. Steering switch
28. Sonar control unit 29. Steering angle sensor 30. Preset switch
31. Around view monitor control unit 32. USB connector 33. Front auxiliary input jacks
34. Rear auxiliary input jacks 35. AV control unit 36. Video distributor
37. Multifunction switch 38. GPS antenna 39. Microphone A. Luggage side lower finisher LH re-
moved condition B.Luggage side lower finisher RH re-
moved condition C.Headlining assembly removed condi-
tion
D. Instrument lower
panel LH removed
condition E. Spiral cable part F. Cluste
r lid C removed condition
G. Within center console H. Instrument panel rear side
Part name Description
AV control unit Integrates hard disk drive (HDD) allowing map data and music data to be stored.
It is the master unit of the MULTI AV system, and it is connected to each control
unit by communication. It operates each system according to communication sig-
nals from the AV control unit.
The AV control unit includes the audio, hands-free phone, navigation, USB con- nection, DVD play and vehicle information functions.
It is connected to ECM and combination meter via CAN communication to obtain
necessary information for the vehicle information function.
It inputs the illumination signals that are required for the front display dimming con- trol.
It inputs the signals for driving status recognition (vehicle speed, reverse and park- ing brake).
The RGB digital image signal and composite image signal are output to front dis-
play unit.
Switches image and sound output to video distributor, inputting image switch sig- nal from headrest display unit via AV communication.
Amp. ON signal and mode change signal transmitted to BOSE amp.
Update of map data is performed with the DVD-ROM.
Front display unit Front display image is controlled by the serial communication from AV control unit.
RGB digital image signal is input from AV control unit.
Composite image signal is input from AV control unit.
Camera image signal is input from around view monitor control unit.
Touch panel function can be operated for each system by touching a display di-
rectly.
Headrest display unit Composite image signal [USB (video data), DVD and auxiliary input images] is in-
put from the video distributor.
It receives the DVD/AUX/USB sound signal from the video distributor, and then transmits it to the headphones.
Outputs image switch signal to video distributor via hard wire, according to rear seat remote controller operation.
Outputs image switch signal to AV control unit via AV communication, according to
rear seat remote controller operation.
Revision: 2010 May2011 QX56
Page 160 of 5598
AV-12
< SYSTEM DESCRIPTION >
COMPONENT PARTS
*1: Image signals cannot be received from iPod®.
Side camera RH It inputs the power supply from around view monitor control unit and outputs the
image of the vehicle RH to around view monitor control unit.
It performs the reception/transmission of the communication signal with around view monitor control unit.
Infrared LED
(Auxiliary lighting) It illuminates around the front RH wheel by the power supply from around view
monitor control unit to improve nighttime visibility of front-side view.
The infrared LED is an invisible light ray.
Sonar control unit It is connected with around view monitor control unit via AV communication and
receives the sonar operation signal from around view monitor control unit.
It transmits the sonar detection status to around view monitor control unit via AV
communication.
It judges the warning level according to the signal from corner sensor.
Corner sensor The obstacle distance is detected. The signal is transmitted to sonar control unit.
Steering angle sensor It is connected to the AV control unit and transmits the steering angle sensor signal
via CAN communication.
Microphone Used for hands-free phone operation.
Microphone signal is transmitted to AV control unit.
Power (Microphone VCC) is supplied from AV control unit.
GPS antenna GPS signal is received and transmitted to AV control unit.
Satellite radio antenna Receives the satellite radio waves and outputs it to AV control unit.
Antenna amp. Radio signal received by glass antenna (main) is amplified and transmitted to AV
control unit.
Power (antenna amp. ON signal) is supplied from AV control unit.
USB connector Image signal
*1 and sound signal of USB input is transmitted to AV control unit.
Part name Description
Revision: 2010 May2011 QX56
Page 162 of 5598
AV-14
< SYSTEM DESCRIPTION >
SYSTEM
MULTI AV SYSTEM : System Description
INFOID:0000000006216216
Multi AV system means that the following systems are integrated.
COMMUNICATION SIGNAL
AV control unit function by transmitting/receiving dat a one by one with each unit (slave unit) that configures
them completely as a master unit by connecting between units that configure MULTI AV system with two AV
communication lines (H, L).
Two AV communication lines (H, L) adopt a twisted pair line that is resistant to noise.
AV control unit is connected by CAN communication, and it receives data signal from ECM and combination
meter It computes and displays fuel economy information value with the obtained information. Transmitting/
receiving of data signal is performed by BCM. Also, it transmits the required signal of vehicle setting and
receives the response signal.
AV control unit is connected with front display unit and serial communication, and it transmits the required
signal of display and display control and receives the response signal from front display unit.
NAVIGATION SYSTEM FUNCTION
Description
The AV control unit controls navigation function whil e GPS tuner has built-in map data, GYRO (angle speed
sensor), on the HDD (Hard Disk Drive).
The AV control unit inputs operation signal with communication signal, through display (touch panel) and multifunction switch and steering switch.
Guide sound is output to front speaker through BOSE am p. from AV control unit when operating navigation
system.
A vehicle position is calculated with the GYRO (angl e speed sensor), vehicle sensor, signal from GPS satel-
lite and map data stored on HDD (Hard Disk Drive), and transmits the map image signal (RGB image, RGB
area, RGB image synchronizing) to the display.
Position Detection Principle
The navigation system periodically calculates the current vehicle
position according to the following three types of signals.
Travel distance of the vehicle as determined by the vehicle speed
sensor
Vehicle turning angle determined by the gyroscope (angular speed
sensor)
The travel direction of the v ehicle determined by the GPS antenna
(GPS information)
The current position of the vehicle is then identified by comparing the
calculated vehicle position with map data, which is stored in the HDD
(Hard Disk Drive) (map-matching), and indicated on the screen with
a current location mark. More accurate data is used by comparing
position detection results from GPS to the map-matching.
FUNCTION NAME
Navigation system function Audio function
DVD play function
Front auxiliary input function USB connection function
Mobile entertainment system Hands-free phone function Touch panel function
Around view monitor function
Camera assistance sonar system Vehicle information function
Auto Light adjustment system
JSNIA0177GB
Revision: 2010 May2011 QX56
Page 163 of 5598
AV
SYSTEMAV-15
< SYSTEM DESCRIPTION >
C
DE
F
G H
I
J
K L
M B A
O P
The current position is calculated by detecting the travel distance
from the previous calculation point, and its direction change.
Travel distance The travel distance is generat ed from the vehicle speed sensor
input signal. The automatic distance correction function is adopted
for preventing a miss-detection of the travel distance because of
tire wear etc.
Travel direction The gyroscope (angular veloci ty sensor) and GPS antenna (GPS
information) generate the change of t he travel direction. Both have
advantages and disadvantages as per the following descriptions.
Input signals are prioritized in each situation. However, this order of priority may change in accordance with
more detailed travel conditions so that the tr avel direction is detected more accurately.
Map-matching
Map-matching repositions the vehicle on the road map when a new
location is judged to be more accurate. This is done by comparing
the current vehicle position (calculated by the normal position detec-
tion method) from the map data stored in the HDD (Hard Disk Drive).
There is a possibility that the vehicle position may not be corrected in the following case, and when vehicle is
driven over a certain distance or time in which GPS in formation is hard to receive. Correct manually the cur-
rent location mark on the screen.
In map-matching, several alternative routes are prepared and pri- oritized in addition to the road judged as currently driving on.
Therefore, due to errors in the distance and/or direction, an incor-
rect road may be prioritized, and the current location mark may be
repositioned to the incorrect road.
If two roads are running in parallel, they are of the same priority.
Therefore, the current location mark may appear on either of them
alternately, depending on maneuvering of the steering wheel and
configuration of the road, etc.
SEL684V
Type Advantage Disadvantage
Gyroscope (angular velocity
sensor) The turning angle is precisely detected.
Errors are accumulated when driving a long dis-
tance without stopping.
GPS antenna (GPS informa-
tion) The travel direction (North/South/East/West) is
detected. The travel direction is not precisely detected when
driving slowly.
SEL685V
SEL686V
Revision: 2010 May2011 QX56
Page 169 of 5598
AV
SYSTEMAV-21
< SYSTEM DESCRIPTION >
C
DE
F
G H
I
J
K L
M B A
O P
Around view monitor screen transition
FRONT VIEW The front view image is from the front camera.
When the selector lever is in any position other than the reverse position, the front view is displayed by
pressing the “CAMERA” switch. It improves the visibility of obstacles in front of the vehicle and helps driving
by the images displayed from Bi rds-Eye view and Front-Side view.
Display the vehicle width guiding line and vehicle distance guiding line in front view and display the predic- tive course line according to the steering angle.
If the steering angle is within approximately 90 degrees, t he predictive course lines on the left/right side are
displayed. If the steering angle is exceeding approxim ately 90 degrees, only the predictive course line on the
outside (in the opposite side of steering direction) is displayed.
AV control unit is connected to the steering angle s ensor and receives the steering angle signal via CAN
communication. AV control unit is transmits steering angle signal to around view monitor control unit via AV
communication.
Around view monitor control unit controls the directi on and distance of the predictive course line according to
the sensor signal from steering angle sensor.
JSNIA3112GB
Revision: 2010 May2011 QX56
Page 170 of 5598
AV-22
< SYSTEM DESCRIPTION >
SYSTEM
Front view guiding lines
REAR VIEW The rear view image is from the rear camera.
When the selector lever is in the reverse position, the rear view is displayed. Backing and parking are
improved by the images from Birds-Eye view and Front-S ide view. The rear wide view function allows the
display of an image with a 180 ° horizontal angle.
Display the vehicle width guiding line and vehicle distance guiding line in Rear view and display the predic- tive course line according to the steering angle (except when using the rear wide view function).
The predictive course line is not di splayed at the steering neutral position.
AV control unit is connected to the steering angle s ensor and receives the steering angle signal via CAN
communication. AV control unit is transmits steering angle signal to around view monitor control unit via AV
communication.
Around view monitor control unit controls the direction and distance of predictive course line according to the
sensor signal from steering angle sensor.
Rear view guiding lines
FRONT-SIDE VIEW
The front-side view image is from the side camera RH.
In Front-Side view, display the vehicle distance guiding line and vehicle width guiding line.
The infrared LED illumination is installed on the door mirror RH to illuminate around the front wheels.
JSNIA0770GB
JSNIA2984GB
Revision: 2010 May2011 QX56