RENAULT KANGOO 1997 KC / 1.G Sheet Metal Work Workshop Manual
KANGOO 1997 KC / 1.G
RENAULT
RENAULT
https://www.carmanualsonline.info/img/7/1735/w960_1735-0.png
RENAULT KANGOO 1997 KC / 1.G Sheet Metal Work Workshop Manual
Trending: fog lights, engine, door lock, wheel size, weight, wiring, mirror
Page 141 of 255
UPPER FRONT STRUCTURE
Plenum chamber
42G
13007-1R
CAA11536R8
A
12
CAB11540R6
B
8
7
13000R1
CAS13024R3
C
1
2
3
42-25
Page 142 of 255
UPPER FRONT STRUCTURE
Plenum chamber
42G
13003-1R13013R
CAA11538R7
D
16
CAS13033R2
E
11
CAA11538R7
F
15
42-26
Page 143 of 255
UPPER FRONT STRUCTURE
Plenum chamber
42G
13010R3
CAA11538R8
G
1
4
42-27
Page 144 of 255

UPPER FRONT STRUCTURE
Windscreen aperture lower cross member
42H
PRB4215
INTRODUCTION
The replacement of this part is a complementary
operation to the replacement of :
- the wheel arch with the cowl side panel for a
frontal impact,
- the front pillar with lining for a side impact.
This operation may be carried out partially (see
diagram and method below).
In the following operation there are only descrip-
tions of the joints specific to the part concerned.
The Parts Department supplies the windscreen
aperture lower cross member (1) without the stee-
ring column mounting (2), which must be ordered
separately.
Information concerning other parts is dealt with
in the respective section.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
1 Windscreen aperture cross member
Part assembled with :
- steering column mounting height adjus-
ter,
- lower reinforcement of windscreen aper-
ture cross member.
2 Steering mounting
Part only.
JOINTS WITH :
Bulkhead
Windscreen aperture lower cross member
Windscreen aperture lower cross member
reinforcement
Steering column mounting height adjuster
Steering column mounting
Cowl side panel (pillar lining)
Windscreen wiper mounting
PARTS CONCERNED (thickness in mm) :
1Bulkhead 1
2Windscreen aperture lower cross
member 1.2
3Windscreen aperture lower cross
member reinforcement 1.2
4Steering column mounting height
adjuster 1.5
5Steering column mounting 2
6Cowl side panel (pillar lining) 1.5
7Windscreen wiper mounting 1.5or
42-28
Page 145 of 255
UPPER FRONT STRUCTURE
Windscreen aperture lower cross member
42H
13014R1
CAB11539-1R5
A
1 2
or
CAB11539R3
B
6 2
CAF11547-2R7
C
62 7
42-29
Page 146 of 255
UPPER FRONT STRUCTURE
Windscreen aperture lower cross member
42H
13224R
CAA11538R8
D
6
2
CAS13030R6
E
2
1 3
CAF11547-4R1
F1
4 2
42-30
Page 147 of 255
UPPER FRONT STRUCTURE
Windscreen aperture lower cross member
42H
13014R2
CAA11536-3R1
G
1
5
CAS13025R3
H
2
3or
CAB11539-1R5
I
1 2 1
42-31
Page 148 of 255
UPPER FRONT STRUCTURE
Steering column mounting
42I
PRB4216
INTRODUCTION
The replacement of this part is a complementary
operation to the replacement of the windscreen
aperture lower cross member.
In the following operation there are only descrip-
tions of the joints specific to the part concerned.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Steering mounting:
Part only.
JOINTS WITH :
Steering column mounting
Steering column mounting height adjuster
Bulkhead
PARTS CONCERNED (thickness in mm) :
1Steering column mounting 2
2Steering column mounting height
adjuster 1.5
3Bulkhead 1
42-32
Page 149 of 255
UPPER FRONT STRUCTURE
Steering column mounting
42I
13224R1
CAA11538-1R8
A
1
2
CAA11536R7
B
1
2
CAA11536-3R1
C
1 3
42-33
Page 150 of 255

UPPER FRONT STRUCTURE
Bulkhead
42J
PRB4217
INTRODUCTION
The replacement of this part is a complementary
operation to the replacement of :
1 - for a frontal impact :
- the wheel arch with the cowl side panel,
- the plenum chamber ,
2 - for a side impact:
- the front pillar with lining,
- the windscreen aperture lower cross mem-
ber,
- the plenum chamber .
This part may be partially replaced (see diagram
and method below).
In the following operation there are only descrip-
tions of the joints specific to the part concerned.
Information concerning other parts is dealt with
in the respective section.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part assembled with :
- windscreen wiper mounting,
- windscreen wiper mounting reinforcement.
JOINTS WITH :
Floor
Windscreen wiper mounting
Windscreen wiper motor mounting
Windscreen pillar
Windscreen pillar lining
Front side cross member
PARTS CONCERNED (thickness in mm) :
1Bulkhead 0.7
2Floor 0.8
3Windscreen wiper motor mounting 1.5
4Windscreen pillar 1
5Windscreen pillar lining 1
6Rear side member, front section 2.5
7Front side cross member 1
8Front pillar 0.8
or
42-34
Trending: ABS, key, wiring, diagram, roof rack, door lock, wheel size