RENAULT KANGOO 1997 KC / 1.G Sheet Metal Work Workshop Manual

UPPER SIDE STRUCTURE
Windscreen aperture pillar
43B
13214R
CAS13028R8
A
1 56
43-7

UPPER SIDE STRUCTURE
Windscreen aperture pillar
43B
13213R
CAQ11697R1
B
1 4
CAI11550-2R4
C
1 43
CAV13469R5
D
152
CAA11537R6
E
5 2
43-8

UPPER SIDE STRUCTURE
Front pillar lining / Cowl side panel
43C
PRB4313
INTRODUCTION
The replacement of this part is a complementary
operation to the front pillar with reinforcement
of cowl side panel for a front side impact.
The cowl side panel reinforcement must be orde-
red separately.
In the operation described below there are only
descriptions of the joints specific to the part
concerned.
Information concerning other parts will be dealt
with in the respective section.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part assembled with dashboard mounting reinfor-
cement.
JOINTS WITH:
Windscreen wiper mounting
Bulkhead
Sill panel closure panel
Plenum chamber
Windscreen wiper connecting bracket
PARTS CONCERNED (thickness in mm) :
1Cowl side panel / front pillar lining
2Windscreen wiper mounting
3Bulkhead
4Sill panel closure panel
5Plenum chamber
or
43-9

UPPER SIDE STRUCTURE
Front pillar lining / Cowl side panel
43C
13014R
CAA11536-1R8
A
1
2
CAA11538-1R4
B
13
43-10

UPPER SIDE STRUCTURE
Front pillar lining / Cowl side panel
43C
13015R
CAA11538-1R4
C
13
CAA11537R3
D
1
4
43-11

UPPER SIDE STRUCTURE
Front pillar lining / Cowl side panel
43C
12999-2R
CAS13028R7
E
15
1
CAS13033R1
F
1 1
43-12

UPPER SIDE STRUCTURE
Front pillar lining / Cowl side panel
43C
13008R
CAA11536-1R6
G
1
2
CAS13024R6
H
1
2 6
43-13

UPPER SIDE STRUCTURE
Centre pillar / sill panel
43D
PRB4314
INTRODUCTION
The replacement of this part is a basic operation
for a front side impact.
In the operation described below there are only
descriptions of the joints specific to the part
concerned.
Information concerning other parts will be dealt
with in the respective section.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part assembled with side door rail guides.
or
JOINTS WITH:
Body side lining
Centre pillar reinforcement
Sill panel lining
Sill panel reinforcement
PARTS CONCERNED (thickness in mm) :
1Centre pillar 1
2Centre pillar reinforcement 1.2
3Sill panel closure panel 1.2
4Sill panel reinforcement 1.2
5Body side lining 0.8
43-14

UPPER SIDE STRUCTURE
Centre pillar / sill panel
43D
13231R1
or
X = 400 mm
CAI11550R6
A
14 3
CAI11550R1
B
1
4
3
43-15

UPPER SIDE STRUCTURE
Centre pillar / sill panel
43D
13226R
or
CAI11550R7
C
12
5
CAS13033R8
D
1 1
CAI11550R8
E
1 2
5
43-16