body ISUZU KB P190 2007 Workshop Repair Manual

10-48 CAB
Important Operations - Installation
10. Tongue Side Seat Belt • Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1/30)



RTW 5A0SH000701
6. Rear End Trim Cover
• Insert the hooks on the back upper portion of the trim
cover to the body panel.


BACK TO CHAPTER INDEX TO MODEL INDEX
ISUZU KB P190 2007

CAB 10-49
REMOVAL AND INSTALLATION




Regular Cab Model
Removal Steps
1. Sill plate
2. Dash side trim cover
▲ 3. Front pillar trim cover
▲ 4. Rear end trim cover
▲ 5. Body side rear lower trim cover
6. Door finisher
▲ 7. Tongue side seat belt
▲ 8. Body side rear upper trim cover


Installation Steps
8. Body side rear upper trim cover
▲ 7. Tongue side seat belt
6. Door finisher
5. Body side rear lower trim cover
▲ 4. Rear end trim cover
3. Front pillar trim assembly
2. Dash side trim cover
1. Sill plate



BACK TO CHAPTER INDEX TO MODEL INDEX
ISUZU KB P190 2007

10-50 CAB

RTW 710SH000501
Important Operations - Removal
3. Front Pillar Trim Cover • Turn up the finisher and pry the trim cover clips free
from the body panel.
Remove the trim cover by pulling upward on the lowe
r
part of it.


4. Rear End Trim Cover
• Pry the trim cover clips free from the body panel, and
slide the trim cover upward to remove it.

5. Body Side Rear Lower Trim Cover
• Pry the trim cover clips free from the body panel.

7. Tongue Side Seat Belt
1) Pull out the adjuster knob.

RTW 5A0SH000501
2) Remove the through ring anchor cover and remove the
seat belt upper anchor bolt.
• Insert the blade of an ordinary screwdriver into the gap
between the D-ring back surface and the cover.
Carefully pry the D-ring latches open. Remove the cover.

BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

CAB 10-51
8. Body Side Rear Upper Trim Cover
• Pry the trim cover clips free from the body panel.

Important Operations - Installation
7. Tongue Side Seat Belt • Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1/30)


4. Rear End Trim Cover
• Insert the hooks on the back upper portion of the trim
cover to the body panel.

BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

10-52 CAB
REMOVAL AND INSTALLATION




RTW 4A0MF000401

Crew Cab Model
Removal Steps
▲ 1. Front sill plate/Rear sill plate
2. Dash side trim cover
▲ 3. Front pillar trim cover
▲ 4. Center pillar lower trim cover
5. Front door finisher
6. Cover
▲ 7. Rear end trim cover
▲ 8. Body side rear lower trim cover
9. Rear door finisher
▲ 10. Front tongue side seat belt
▲ 11. Center pillar upper trim cover
12. Rear tongue side seat belt
▲ 13. Body side rear upper trim cover


Installation Steps
13. Body side rear upper trim cover
▲ 12. Rear tongue side seat belt
11. Center pillar upper trim cover
▲ 10. Front tongue side seat belt
9 Rear door finisher
8. Body side rear lower trim cover
▲ 7. Rear end trim cover
6. Cover
5. Front door finisher
4. Center pillar lower trim cover
3. Front pillar trim cover
2. Dash side trim cover
1. Front sill plate/Rear sill plate



BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

CAB 10-53

Important Operations - Removal
1. Front Sill Plate/Rear Sill Plate
• Pull out the 4 clip positions (Front).
• Pull out the 2 clip positions (Rear).

3. Front Pillar Trim Cover
• Turn up the finisher and pry the trim cover clips free
from the body panel.
Then remove the trim cover by pulling upward on the lower part of it.
4. Center Pillar Lower Trim Cover
• Pry the trim cover clips free from the body panel.

7. Rear End Trim Cover
• Pry the trim cover clips free from the body panel, and
slide the trim cover upward to remove it.
8. Body Side Rear Lower Trim Cover
• Pry the trim cover clips free from the body panel.

BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007

10-54 CAB


10. Front Tongue Side Seat Belt
1) Pull out the adjuster knob.
RTW 3A0SH000301
2) Open the through ring anchor cover and remove the
seat belt upper anchor bolt.
11. Center Pillar Upper Trim Cover
• Pry the trim cover clips free from the body panel.

13. Body Side Rear Upper Trim Cover
• Pry the trim cover clips free from the body panel.



Important Operations - Installation
12. Rear Tongue Side Seat Belt • Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1/30)


BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

CAB 10-55


10. Front Tongue Side Seat Belt
• Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1/30)

7. Rear End Trim Cover
• Insert the hooks on the back upper portion of trim cove
r
to the body panel.




BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

CAB 10-71
QUARTER GLASS (EXTEND CAB)
REMOVAL AND INSTALLATION




RTW 5A0MF000501

Removal Steps
▲ 1. Body side rear trim covers
2. Hinge/Fastener
3. Quarter glass
4. W eather strip

Installation Steps
▲
4. W eather strip
3. Quarter glass
2. Hinge/Fastener
1. Body side rear trim covers







Important Operation - Removal
1. Body Side Rear Trim Covers • Refer to Interior Trim Panels in this section.

Important Operation – Installation
4. Weather Strip • Install the weather strip by aligning the corners with a
white mark to the upper corners on the body panel.


BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

10-76 CAB
FRONT SEAT BELT
REMOVAL AND INSTALLATION
(TONGUE SIDE SEAT BELT)










RTW 5A0LF001101

Removal Steps
1. Body side rear lower trim cover
2. Lower anchor bolt
▲ 3. Knob
▲ 4. Cover
▲ 5. Upper anchor bolt
6. Retractor fixing bolt
7. Body side rear upper trim cover
8. Adjustable shoulder anchor fixing bolt
Installation Steps
▲
8. Adjustable shoulder anchor fixing bolt
7. Body side rear upper trim cover
▲ 6. Retractor fixing bolt
▲ 5. Upper anchor bolt
4. Cover
3. Knob
▲ 2. Lower anchor bolt
1. Body side rear lower trim cover



BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007