JAGUAR XFR 2010 1.G Workshop Manual
Page 2231 of 3039
Page 2232 of 3039
Page 2233 of 3039
10.
11. WARNING: Failure to follow this instruction may cause
damage to the vehicle.
CAUTION: Make sure the locating dowels are installed
correctly.
CAUTION: Make sure that these components are
installed to the noted removal position.
1. To install, reverse the removal procedure. Installation
Page 2234 of 3039
Interior Trim and Ornamentation - C-Pillar Lower Trim Panel
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details. Published: 11-May-2011
1. Refer to: C-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
2.
Page 2235 of 3039
www.JagDocs.com
Page 2236 of 3039
5.
6. Torque: 40 Nm 7. CAUTIONS:
Note the fitted position of the component prior to
removal.
Make sure that these components are installed to the
noted removal position.
Torque: 9 Nm
Page 2237 of 3039
Page 2238 of 3039
Interior Trim and Ornamentation - C-Pillar Trim Panel
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details. Published: 12-May-2014
1. Refer to: Loadspace Trim Panel RH - Sportbrake (501-05, Removal and
Installation).
2. CAUTIONS:
Note the fitted position of the component prior to
removal.
Make sure that the clips are correctly located.
3.
Page 2239 of 3039
5.
Page 2240 of 3039
6. CAUTIONS:
Make sure the locating dowels are installed correctly.
Make sure that the clips are correctly located.
Torque: 6 Nm
7. CAUTIONS:
Note the fitted position of the component prior to
removal.
Make sure that the clips are correctly located.
8. CAUTIONS:
Note the fitted position of the component prior to removal.
Make sure that the clips are correctly located. www.JagDocs.com