MITSUBISHI OUTLANDER SPORT 2014 3.G Owners Manual
Manufacturer: MITSUBISHI, Model Year: 2014, Model line: OUTLANDER SPORT, Model: MITSUBISHI OUTLANDER SPORT 2014 3.GPages: 388, PDF Size: 20.04 MB
Page 241 of 388

Automatic climate control air conditioner8-4 For pleasant driving
8
E00702401436
Cooling or heating can only be performed when ready indicator is illuminating. When the operation mode is ON, only the blower i
s available.
E00702502476
Automatic climate control air conditioner
NOTE
zIf the drive battery level display indicates 0, the cooling performance cannot be obtained even the air conditioner is turned o
n.
Refer to “Drive battery leve
l display screen” on page 6-9.
zIf the engine cannot be started
due to fuel shortage, etc., the heating perform
ance cannot be obtained even the air conditioner
is turned on.
Control panel Dual-zone automatic climate control air conditioner1- Passenger’s side temperature control
switch
2- Air conditioning switch
3- Blower speed selection switch4- MODE switch
5- Driver’s side temperature control
switch
6- Air selection switch
BK0203201EN.book 4 ページ 2013年11月19日 火曜日 午前11時50分
Page 242 of 388

Automatic climate control air conditioner
For pleasant driving 8-5
8
E00702801371
Press of the blower speed selectionswitch to increase the blower speed.Press of the blower speed selectionswitch to decrease the blower speed.The selected blower speed will be shown inthe display (A).
E00703001673
Press or of the temperature controlswitch to the desired temperature.The selected temperature will be shown in thedisplay (A).
7- Demister switch8- AUTO switch9- Rear window demister switch
m P.6-53
10- OFF switch11 - P assen ge r ’s side tem pera tu re disp la y
m P.8-5
12- DUAL indicator13- Mode selection display14- Driver’s side temperature display
m P.8-5
15- Air conditioning indicator16- Blower speed display
NOTE
zThere is an interior air temperature sensor(A) in the illustrated position.Never place anything on
top of the sensor,
since doing so will prevent it from function-ing properly. zSince the air conditioning operation is con-trolled while the ECO mode is operating,you may feel that effectiveness of the airconditioner is weak. m ECO mode switch P.6-46
zEven if the ECO mode is operating, you canselect normal operation of the air condi-tioner.On vehicles equipped
with Mitsubishi Multi-
Communication System (MMCS), screenoperations can be used to change the setting.Refer to the separate
owner’s manual for
details. zIn extreme cold, the air conditioning controlpanel screen may operate sluggishly. Thisdoes not indicate a problem.It will disappear when the vehicle interiortemperature rises to
a normal temperature.
zA sound will be made every time you pushall the switches.
Blower speed selection switch
NOTE
1- Increase2- DecreaseTe m p e r a t u r e c o n t r o l s w i t c h
BK0203201EN.book 5 ページ 2013年11月19日 火曜日 午前11時50分
Page 243 of 388

Automatic climate control air conditioner8-6 For pleasant driving
8
The settings described above are the factorysettings.The air selection and air conditioningswitches can be customised (function settingchanged), and the automatic switching of out-side air and the air conditioner according tooperating conditions can be changed asdesired.For further information, we recommend youto consult a MITSUBISHI MOTORS Author-ised Service Point.Refer to “Customising the air conditioningswitch” on page 8-8.Refer to “Customising the air selection” onpage 8-7.The driver’s side and the passenger’s sidetemperature can be controlled independently.At this time, the “DUAL” indicator will beshown in the display (A).
zSynchronized modeIf the driver’s side temperature controlswitch is pressed, the passenger’s sidetemperature will also be controlled to thesame setting temperature as the driver’sside. zDual modeIf the passenger’s side temperature con-trol switch is pressed under synchronizedmode, the system will switch to dualmode. In dual mode, the driver’s side andthe passenger’s side temperature can beset separately by using each temperaturecontrol switch.Press the AUTO switch to return to syn-chronized mode.
E00703401808
To change the air selection, simply press theair selection switch.
NOTE
zThe temperature value of air conditioner isswitched in conjunction
with outside temper-
ature display unit of the multi informationdisplay.Refer to “Changing the temperature unit” onpage 6-17. zWhile the engine coolant temperature is low,the temperature of th
e air from the heater
will not change instantly, even if you haveselected warm air with the switch.To p r e v e n t t h e w i n d s c r e e n a n d w i n d o w sfrom fogging up, the ventilator mode will bechanged to “ ” and the blower speed willbe reduced while the system is operating inthe AUTO mode. zWhen you feel that it is hot or cold to the set-ting temperature, it is possible to adjust sothat you can feel more comfortable.For further information, we recommend youto consult a MITSUBISHI MOTORSAuthorised Service Point. zWhen the temperature is set to the highest orthe lowest, the air selection and the air condi-tioner will be automatically changed as fol-lows.Also, if the air selec
tion is operated manually
after an automatic changeover, manual oper-ation will be selected.•Quick Heating (When the temperature is setto the highest setting)Outside air will be introduced and the airconditioner will stop.
•Quick Cooling (When the temperature is setto the lowest setting)Inside air will be r
ecirculated and the air
conditioner will operate.
zWhen the air conditioner is set to quick heat-ing, the engine starts
running (except vehi-
cles with electric heater).