JAGUAR X308 1998 2.G Workshop Manual

JAGUAR X308 1998 2.G Workshop Manual X308 1998 2.G JAGUAR JAGUAR https://www.carmanualsonline.info/img/21/7640/w960_7640-0.png JAGUAR X308 1998 2.G Workshop Manual
Trending: Mass air flow, sport mode, flex plate, charging, vi number, tow bar, wiper size

Page 1781 of 2490

JAGUAR X308 1998 2.G Workshop Manual Installation 
 
 
 
1. Slacken nut. 
2. Slacken bolt (A post side), remove remaining bolt. 
Remove blower.  
1.  Installation is a reversal  of the removal procedure. 
 
2. Tighten nuts to specif

Page 1782 of 2490

JAGUAR X308 1998 2.G Workshop Manual Air Distribution and Filtering - Plenum Chamber 
Removal and Installation 
Removal 
Installation 
 
 1. 
Remove instrument  panel for access; refer to 76.46.01. 
 
2. Remove rear face primary duct.

Page 1783 of 2490

JAGUAR X308 1998 2.G Workshop Manual Heating and Ventilation - Heating and Ventilation 
Description and Operation 
Schematic Diagram 
 
Parts List 
Heater System Components 
ItemPart NumberDescription
1—Heater matrix 
2—Firewall 
3

Page 1784 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
Parts List 
The heater circuit scavenges  coolant from the engine cooling system by mean s of an electric water pump. The water pump 
has a protection circuit to inhibit operation when the coolant

Page 1785 of 2490

JAGUAR X308 1998 2.G Workshop Manual Engine speed (valve closed with the engine not running)  Demand (set) temperature  In-car temperature sensor  Solar sensor  
Re-heating of the refrigerated air is contro lled by the time t

Page 1786 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
Parts List 
 
 
ItemPart NumberDescription
1—Cobra 
2—Spring band 
3—Quick-fit 
4—Norma push and seal R type 
5—Norma push and seal 15

Page 1787 of 2490

JAGUAR X308 1998 2.G Workshop Manual Heating and Ventilation - Heater Core 
Removal and Installation 
Removal 
Installation 
 
 1. 
Drain radiator coolant only; re fer to 26.10.01 or (SC) 26.10.01. 
2.  Remove instrument panel for  acces

Page 1788 of 2490

JAGUAR X308 1998 2.G Workshop Manual Heating and Ventilation - Heater Core and Evaporator Core Housing 
Removal and Installation 
Removal 
1. Disconnect battery ground cable (IMPORTANT, see SRO 
86.15.19 for further information). 
2.  Re

Page 1789 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
 
9. Remove upper steering  column upper fixings. 
1. Remove bolts. 
Allow column to rest on the floor  
 
10.  Cut cable tie which secures console harness to LH blower 
duct. 
 
11.  Remove LH f

Page 1790 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
 
13. Cut cable tie which secures console harness to RH blower 
duct. 
 
14.  Remove RH fan motor duct. 
Remove screws.  
Remove duct.  
 
15. Disconnect heater / cooler assembly electrical co
Trending: Radiator, Suspension, fuse box diagram, fog light, Seat, crankshaft position sensor, wishbones