RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual https://www.carmanualsonline.info/img/7/1731/w960_1731-0.png RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual

Page 121 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual DIESEL EQUIPMENT
Pump - Timing
13
IMPORTANT : the engine must only be rotated by
turning a wheel, in 5th gear, and in its operating
direction; if it is accidentally turned in the
opposite direction, r

Page 122 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual DIESEL EQUIPMENT
Pump - Timing
13
Components  of tool  Mot. 1079
A Timing pin
B Dial gauge support
C30 mm  dial gauge
91285R
Lock the engine using tool  Mot. 1054,  according
to the following procedur

Page 123 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual 12338R
DIESEL EQUIPMENT
Pump - Timing
13
MODIFICATION OF TOOL  Mot. 1358
For the adjustment of  HTD2 pullies,   carry out the
following  modification:
File down the three brackets on the tool by  1.5

Page 124 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual DIESEL EQUIPMENT
Pump - Timing
13
Fit tool  Mot. 1358 into the three openings of
flange  (B).
Turn the tool - flange assembly so that the three
pins of the tool  fit  into the three  slots in the  ad-

Page 125 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual DIESEL EQUIPMENT
Pump - Timing
13
DI1303-1
- Fit pin  Mot. 1054.
12419R
- Keep a constant  pressure on the pin.
- Turn the engine slowly until the pin
penetrates in the slot in  the crankshaft. 
-   U

Page 126 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual DIESEL EQUIPMENT
Adjusting idle speed
13
12870R
It is vital  to make these adjustments when the en-
gine is warm,  and after the engine cooling fan
has operated at least twice.
The idle speed adjustme

Page 127 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual 93703S
This test can only be carried out using a lead testing kit supplied by  NAUDER.
To obtain a testing kit,  contact your local After Sales Head Office.
Part numbers : - Complete kit : T900
- 40 t

Page 128 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual ANTIPOLLUTION
Fuel vapour rebreathing
14
OPERATING DIAGRAM OF THE CIRCUIT
1 Inlet manifold
2 Fuel vapour absorber (canister)
3 RCO  control solenoid valve
4 Cylinder head
R Pipe from fuel tank
99933R

Page 129 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual ANTIPOLLUTION
Fuel vapour rebreathing
14E7J Engine
OPERATING DIAGRAM OF THE CIRCUIT
1 Inlet manifold
2 Fuel vapour absorber  (canister)
3  RCO control  solenoid
4 Throttle body
R Pipe from fuel tank
1

Page 130 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual ANTIPOLLUTION
Fuel vapour rebreathing
14
CONDITION FOR BLEEDING THE CANISTER ( D7F
engine)
• Coolant temperature greater than+ 15 °C
•Air temperature greater than +10 °C.
• No load position no